If the HP wireless printer isn't printing in color, there are three possible explanations for this problem. Examine all potential causes of why my hp printer not printing in detail before moving on to printer troubleshooting:
- Driver error: A driver conflict between the devices is conceivable if the user uses many printers on the same computer. This may also prohibit the HP printer from printing in color or the hp printer in black and white. To fix this, uninstall any printer drivers you used from the PC.
- Disabled color printing feature: The user must visit the HP printer properties and activate the color printing option to print in color. If the color option is deactivated, the HP printer of the user won't print in color.
- Clogged Printhead: The HP printer won't print in color if the printhead hasn't been cleaned after being used for a time. It is suggested that you manually clean the printhead with tissue paper. The HP application is also available on the printer for the user to use.
The user should check the red cartridge's ink level and the cyan level if the black ink not printing hp. On the control panel for the printer, click the Setup button. Select Tools by using the down arrow key, then hit OK.
One of the most annoying things a printer user could encounter is when it starts printing blank pages out of the blue. Additionally, this issue can be quite frustrating if the user is working on a vital document or file. Fortunately, there are solutions to this problem, allowing the user to resume where they left off right away. They are also simple enough to complete independently, even without any technical knowledge. If the hp printer not printing ink, the user must follow the following steps:
- To see whether there is enough ink left, check the Toner / Ink Levels. If there isn't enough fuel in the tank, the user will need to buy new cartridges to replace the empty ones.
- Remove the ink cartridges and inspect them for damage. Replace damaged units as soon as feasible with new ones if the user discovers them.
- Check to make sure each cartridge is installed properly. Take out the ink tanks and replace them correctly. Verify that each piece is securely locked in place.
This may resolve the problem of the hp printer has ink but not printing.
There are a few other reasons to know why my hp printer not printing.
- Turn off the printer and start again:
For most gadgets, a straightforward reset can occasionally fix typical mechanical or operational issues. Therefore, it makes sense to test the easiest solution first to see if it works. Follow these instructions to reset the printer:
- Press the Power button on the printer and wait for a complete shutdown of the machine.
- The electrical outlet's power cord should be disconnected. Reconnect the power cord to the outlet after waiting three minutes.
- To activate it, press the Power button on the gadget. Test printing should reveal whether printouts are functioning normally.
- Automated Cleaning:
When it comes to inkjet printers, the user can use the printer's automatic cleaning cycle to unclog the print head. This cycle can be started by the user via the printer's control panel or the Printer Properties page in the Control Panel of the computer.
The procedure causes the printer to discharge extra ink while softening and clearing print head jams. If the simple cleaning doesn't clear the print head obstructions, choose the deep cleaning function option.
Also Read
Why Is My Printer Printing Blank Pages